Interface Mode

The Interface Modes are a series of preset operational modes setting information from I/O and port communication baud rates.

Transmit Only

To turn Transmit Only Mode on, send out the code 'INTFMODE,0'.
Note: This is the default mode of the transmitter.

In this mode of operation, the transmitter will only display transmit messages in a terminal window.

Transmit and Receive

To turn Transmit-Receive Mode on, send out the code 'INTFMODE,1'.

In this mode of operation, the transmitter will display transmitted and received messages in a terminal window.

Wait Reducer Compatibility

To turn Wait Reduce Compatibility Mode on, send out the code 'INTFMODE,2'.
Note: It is recommended to turn on the Wait Reducer Mode first before using this command.

In this mode of operation, the transmitter will display received messages from the TX-13C in a terminal window.

If you need to return to the transmitter parser, send out the code '!!!'.