Discussions

Ask a Question
Back to All

Integration with ERP

Hi, I already have a T74C232, T7460 with some RX-CS4NP Coasters. I want to make an integration with my ERP. I read all the documentation and I can communicate with the transsmiter (T74C232) send commands and it seems that works, but I dont know who to program my coaster, can you help me with this?

Hi Miguel,

Programming CS4 (or CS6, CS7, and AT9) with the C232, you'll need to send the following command:

  1. Set the system ID with the RID command.
  2. Use LPROG,0,#,m,p

= pager number

m = mode (1 for vibe off, 3 for vibe on)
p = power (usually just use 5)

Keep in mind the modes above only work for the pager types listed above. If you're using other pagers, the mode is different:

AT-4 mode 0 for vibe off, 2 for vibe on
SP-4 mode 4 for vibe off, 6 for vibe on

I hope that helps! Let me know if you have any questions.